Enjoy free shipping, and get it delivered next day!

Testimonials

W. Byrum

This kit was easy to use and it did a great job.This kit contains everything you need to restore your headlights. My headlight lenses weren't horrible to start with, so I figured this kit would do the job and it did. I had recently noticed some cloudiness in the headlight lenses and knew the sooner I repaired it the better. This kit did exactly what I needed. I'm very pleased with the results. I had never done this before and it really was pretty easy, just read the directions and follow them exactly. The headlights come out very easily on my pickup truck so I removed them to make the task slightly easier. I did steps one and two and dried off both headlights with a towel. I let them sit for about 15 minutes and then dried them off again with two clean micro fiber cloths, one for each light. Having them completely dry before applying the final coating is very important. Before applying the coating inspect each lens carefully and if you see any cloudiness repeat step two. The better you polish the better the end result will be. I would recommend this lit.


J. Randy

This restoration kit did a great job of restoring the headlights on my daughter's 2009 Honda Civic. You can see in the before and after pictures how much better they look.


The process took about an hour for both headlights. Make sure you have several towels handy for the drying phase. You'll also need a spray bottle filled with water. Everything else you need is in the kit including the tape to mask off the paint around the headlights. The process was pretty straightforward, but your arms will be tired after the sanding phase. I have a 3" battery powered car detailer that I will likely use the next time I do this.



Once sanding was complete I dried the lenses thoroughly. They still looked quite cloudy from the sanding. As soon as I applied the ceramic coating however, the cleared right up. I couldn't believe how good they looked. My daughter said she didn't think they ever looked that good.


I'm not sure how long this will last but if it lasts a year I'll be happy. It is an inexpensive kit and it only took an hour of my time. i would get this kit again.

R. Avila

Now in all honesty I did not use this on headlights. I used the kit on my third member light as a test. Worked out great. Step one the oxidation removal wipe spent a good 5 minutes rubbing away albiet maybe longer than needed. After letting step 1 dry up i rinsed and wiped dry with a microfiber towl. Step 2 i proceeded to wet sand away with the 2000 grit for 5 minutes then proceeded on to water and 3000 grit for another 5 minutes. After getting all the 2000 grit swirls out with the 3000 grit I went ahead and rinsed and wiped it clean again with a microfiber towel. Step 3 after confirming completely dry I opened up the ceramic coat wipe and applied in smooth one directional strokes overlapping a bit with each wipe. Now sitting on the counter with a paper towel under it in case of any drippage and looks like new.


It is a smoked lense that always had a haze to it but as you can see the LED's are all clearly visible now and no longer lost in the fog.